Extruded Heat Sinks
CreateTime：2017/2/15
Aavid Thermalloy’s extruded heat sinks range from simple flat back fin structures to complex geometries for optimized cooling
Image of Aavid Thermalloy’s Extruded Heat SinksAavid Thermalloy offers a selection of extruded heat sink profiles in over 5,000 tooled shapes. These solutions provide a greater range of natural convection solutions for higher power systems or can be combined with a fan for high performance forced convection cooling.
Aavid extruded heat sink profiles range from simple flat back fin structures to complex geometries for optimized cooling that fits any board or device. These profiles include max clip extrusions which can be paired with Aavid max clips to further improve thermal performance while saving time and money on mounting and assembly. These can all be quoted through Digi-Key.
Features
Thousands of available profiles
Cut-to-length and raw half-bar available
Cost saving features
Improved cooling and device performance
Additional options for these profiles include:
Option One
Half-bar profiles; typically 4 feet long
Priced per foot
Available unfinished only
Ready to ship from Digi-Key
Option Two
Raw bar at the factory length; typically 8 feet long
Priced per foot
Available unfinished only
Can be quoted through Digi-Key
Option Three
Cut to a customer specified length
Priced per piece
Can be quoted through Digi-Key
Cut to length is ±0.015”; tighter tolerances available, please specify
Customer-specified finish (see finish options below)
Length called out in inches, up to 3 decimal places
Option Four
Build to print
Machined to customer’s drawing
Priced per piece
Customer-specified finish (see finish options below)
Can be quoted through Digi-Key
** Digi-Key can offer quotes on secondary services for options two, three, and four. For more information on Aavid available options or for assistance, contact CustomAavidProducts@digikey.com. Please send outline dimensional drawings to the aforementioned e-mail address.
Additional Fabrication Capabilities Available:
Chamfering
Punching
Counterboring
Reaming
Cutting (sawing)
Sanding
Deburring (automated)
Slotting
Drilling (CNC)
Machining (EDM)
Epoxy bonding
Stamping (high-speed)
Epoxy isolation
Tapping
Fly cutting
Tumbling
Milling (CNC)
Finish Options Include:
Anodized
Painted
Caustic etched
Silk screened
Washed
Degreased
Chromated (RoHS compliant)
** Combine any Aavid extruded heat sink with an Aavid thermal interface material and fan for a full, reliable cooling solution.
Extruded Heat Sinks